LINER REPLACEMENT •

Pool Liner Replacement in

Empire Pools installs premium vinyl liners for pools — precision measuring, sub-base touch-ups, bead-track inspection, and wrinkle-free vac set. We plan each replacement around traffic and access patterns near Hempstead Turnpike (NY-24), Merrick Avenue, East Meadow Avenue, and Front Street to keep staging clean and simple on install day. We also coordinate around local anchors like Eisenhower Park and the surrounding residential blocks connecting toward Levittown and Westbury so delivery, hose routes, and equipment placement don’t become a headache.

Every liner job starts with detail work that most companies rush: we verify wall height, radiuses, hopper/deep-end geometry, and step/bench dimensions so the factory build matches your pool—not a “close enough” template. Before the liner goes in, we inspect the bead receiver, coping, and track for brittleness or gaps that can cause the liner to pop out later, and we flag anything that should be corrected while the pool is empty. On install day we prep the floor so it’s smooth underfoot (patching divots and low spots, addressing vermiculite or base wear where needed), then we use a controlled vac set and staged fill pace to pull the liner evenly into corners and seams. If conditions change—wind picks up, debris starts dropping, or access is tight—we adjust our staging (hose routes, equipment placement, debris control) so the liner stays clean during the most important part of the job: the first few inches of water and final alignment before cut-ins.

• Local Insight

Tuned for neighborhood access + Long Island weather swings

East Meadow installs often come down to clean staging and timing—tight side-yard access, shared driveways, and quick weather changes. We plan delivery, hose routes, and vac-set protection so the liner sets smooth and stays clean.

From homes near Hempstead Turnpike (NY-24) to blocks by Eisenhower Park and corridors along Merrick Avenue, we keep the process organized and predictable—measurement, build, install, cut-ins, and fill guidance.

What’s Included

  • On-site measure (length/width/depths), wall height, and corner radii verification.
  • Bead track inspection; replace brittle lock-in as needed (quoted on site).
  • Sub-base touch-ups: floor trowel/patch, divot and wrinkle prevention.
  • Liner hang and dual vac set for tight fit prior to filling.
  • Cut-ins after water passes threshold: main drains, returns, lights, and skimmer.
  • Hardware refresh (gaskets/faceplates/screws) as required by condition.
  • Haul-away of old liner (available; quoted by weight/condition).
  • Fill guidance to protect seams and prevent liner float; chemistry start-up.
  • Note: Structural repairs, wall foam, vermiculite/base rebuild, and plumbing repairs are quoted if observed.

Why Choose Empire Pools

  • expertise — manage access, debris, and fast weather swings during vac set.
  • Wrinkle-free process with staged fill, seam alignment, and photo documentation.
  • Transparent options: pattern choices, wall foam, step gaskets, and hardware refresh.
  • Coordination for water delivery or hydrant permits when required (town rules vary).
  • Clear scope & pricing before we begin — no surprises.
  • Post-install check-in to confirm fit, fill progress, and chemistry balance.
Starting at $2,800 + tax

Local Reviews

★★★★★

“We’re close to Eisenhower Park and wanted a clean, wrinkle-free finish. The fit is perfect and the seams are straight.” — T. M.,

★★★★★

“They caught a worn section of bead track before install and fixed it so the liner wouldn’t pop out later. Super thorough.” — A. C.,

★★★★★

“Great communication and photo updates. Cut-ins were clean and everything stayed smooth through the fill.” — R. P.,

★★★★★

“We’re off Hempstead Turnpike (NY-24) and access was tight. They staged everything neatly and protected our landscaping.” — J. S.,

★★★★★

“From measuring to install day, it was organized. No wrinkles, no loose corners, and no surprises.” — L. K.,

See 105+ five-star reviews →

Liner Replacement — FAQs

Do you replace pool liners throughout , NY?
Yes — we cover and nearby Nassau/Suffolk areas. We schedule measurement first, then coordinate manufacturing and install timing.
How long does a liner replacement usually take?
Once the liner is on site, most installs are completed in a day. Fill time depends on water source and hose flow; we’ll guide the pace to protect seams and prevent float.
Can you fix bead-track or coping issues while the pool is empty?
Yes. We inspect the bead receiver/track during measurement and again on install day. If anything is brittle, cracked, or loose, we quote the fix before we proceed.
What if my pool has steps, benches, or a custom deep end?
That’s exactly why we measure carefully. Steps, benches, and hopper geometry are included so the factory build fits your pool precisely (not a generic template).
What can delay an install in ?
The most common delays are water logistics (source/flow), unexpected base repairs once the old liner is out, and weather/wind on install day. We plan staging and timing to reduce risk.
What helps you quote faster?
Pool shape, approximate dimensions, wall height, step/bench details, and a few photos (wide pool shot + equipment pad + bead track close-up) help us price accurately.
Do you remove and haul away the old liner?
Yes (available). Haul-away depends on condition/weight and is quoted in advance so you can decide before install day.
Explore Liner Options 📞 Call for Liner Replacement Help