POOL HEATER INSTALLATION •
Pool Heater Installation in
Empire Pools installs and replaces gas pool heaters and heat pumps for homeowners who want a longer, more reliable
swim season. We don’t just “swap the box” — we help you choose the right heater based on pool size, target temperature,
cover usage, and real-world backyard conditions (wind exposure, shade patterns, and colder nights can change what “enough heat”
actually means). We also look at your equipment pad and plumbing so the finished install is clean, service-friendly,
and easy to operate — with unions, shutoffs, and a layout that makes sense.
Because installs often vary by property, we walk you through the practical details up front: gas vs. heat pump,
warm-up expectations, operating cost considerations, and what needs to be coordinated with a licensed gas and/or electrical pro.
Whether your pad is behind the house near Larkfield Rd, off Jericho Turnpike (NY-25), close to Elwood Rd,
along Bellerose Ave, or nearer the Sunken Meadow State Parkway approach, we plan the job around access, airflow clearances,
and a neat final setup. The goal is simple: start your season earlier, stay warm later, and never have to guess which buttons to push.
What to Expect
Stay Warmer, Longer in
A properly-sized pool heater is more than just BTUs on a box. We look at your pool size, depth, wind exposure, cover usage,
and how you actually swim before recommending a heater. Our team explains gas heaters vs. heat pumps, reviews your
existing gas and electric setup, and helps you choose a model that fits your budget and goals. On install day we set the heater
on a solid base, re-plumb the pad with unions and bypass where appropriate, and work with your licensed gas and/or electrician
to finish connections. Once everything is live, we bleed air, fire the heater, verify flow and temperature rise, and show you
exactly how to use and protect your new heater through the season.
What’s Included
- On-site review of pool size, pad layout, wind exposure, and cover use.
- Discussion of gas heater vs. heat pump options and which makes sense for your property.
- Heater sizing recommendations based on pool volume, target temperature, and season length.
- Removal of old heater (if applicable) and preparation of a stable pad or base for the new unit.
- Clean, service-friendly plumbing with unions, shutoffs, and bypass where appropriate.
- Integration with your existing pump, filter, and, where applicable, automation or salt system.
- Startup and testing: purge air, verify proper flow, and confirm heater is firing and holding temp.
- Owner walk-through at the pad — modes, setpoints, basic troubleshooting, and protection tips.
- Labeling of key valves and controls so you’re not guessing after we leave.
-
Note: Gas line and electrical work are handled by a licensed professional. We can coordinate with your
contractor or recommend options. Pool heater installation is custom — call for pricing.
Why Choose Empire Pools
- Local experience sizing heaters for windy backyards, shaded yards, and shoulder seasons.
- We look at the whole system — pump, filter, plumbing, gas, and electric — not just the heater box.
- Honest guidance on gas heater vs. heat pump so you understand pros, cons, and operating costs.
- Clean, organized equipment pads that future techs can actually work on without cutting everything apart.
- Integration with automation and salt systems to keep the heater protected and easy to control.
- Clear expectations on warm-up times so you know what your heater can realistically do.
- Goal: reliable heat with fewer surprises, so you’re using the pool instead of fighting cold water.
Call for pricing
What Heater Customers Say
★★★★★
“They didn’t just install a heater — they sized it correctly for our pool and explained exactly what to expect on cooler nights. Huge difference.” — T. Harrington, East Northport
★★★★★
“Our old setup was a mess. The new plumbing is clean, everything is labeled, and the heater fires up fast without any weird cycling.” — L. Marino, East Northport
★★★★★
“They coordinated perfectly with our gas contractor so the whole job felt seamless. No delays, no finger-pointing.” — R. Kwon, East Northport
★★★★★
“We went back and forth on gas vs. heat pump. They laid out the pros/cons and operating costs in a way that actually made sense.” — M. D’Angelo, East Northport
★★★★★
“Start-up and walkthrough were great. I know what each valve does and how to protect the heater through the season.” — S. Feldman, East Northport
Pool Heater Installation — FAQs
How long does it take to install a new pool heater?
Most installs can be completed in a day once the site is ready and any licensed gas/electrical connections are scheduled.
The timeline depends on pad access, whether we’re removing an old heater, and if plumbing needs to be reworked for better flow.
We’ll outline the steps clearly before we start so you know what happens and when.
What size heater do I need for my pool in ?
Heater sizing starts with your pool volume, but real performance depends on wind exposure, shade, cover use, and the months you want to swim.
We size for your actual goal (quick warm-ups vs. steady maintenance) and match the heater to your system’s flow so you get consistent results,
not a heater that struggles or cycles.
Should I choose a gas heater or a heat pump?
If you want fast warm-ups and strong performance in cooler spring/fall weather, gas is usually the winner. If you want efficiency and steady
heating over time (and you’re okay with slower warm-ups), a heat pump can be a great fit. We’ll recommend the best option based on how you
actually use the pool and what your yard conditions look like.
Will a new heater work with my current pump, filter, and salt system?
In most cases, yes. We check your pump size, filter condition, plumbing layout, and any salt/automation components to make sure the heater sees
the right flow and won’t be stressed. If a bypass, unions, or shutoffs are needed for protection and easy servicing, we build that into the install.
How do I get the most heat without running the heater nonstop?
Use a cover. It’s the #1 way to reduce heat loss and cut operating costs. After that: keep chemistry balanced, maintain strong circulation, avoid
big temperature swings, and keep airflow clear around the unit (especially for heat pumps). During the walkthrough, we’ll give you practical setpoints
and habits so you get comfort without wasting fuel or electricity.
