POOL HEATER INSTALLATION •
Pool Heater Installation in
Empire Pools installs and replaces gas pool heaters and heat pumps for homeowners who want a longer, more reliable
swim season. We don’t just “swap the box” — we help you choose the right heater based on pool size, target temperature,
cover usage, and real-world backyard conditions (wind exposure and cooler nights near the North Shore can change what
“enough heat” actually means). We also look at your equipment pad and plumbing so the finished install is clean, service-friendly,
and easy to operate — with unions, shutoffs, and a layout that makes sense.
Because installs often vary by property, we walk you through the practical details up front: gas vs. heat pump,
warm-up expectations, operating cost considerations, and what needs to be coordinated with a licensed gas and/or electrical pro.
Whether your pad is tucked behind the house off major roads, closer to the water, or set
back on quieter residential streets, we plan the job around access, airflow clearances, and a neat final
setup. The goal is simple: start your season earlier, stay warm later, and never have to guess which buttons to push.
What to Expect
Stay Warmer, Longer in
A properly-sized pool heater is more than just BTUs on a box. We look at your pool size, depth, wind exposure, cover usage,
and how you actually swim before recommending a heater. Our team explains gas heaters vs. heat pumps, reviews your
existing gas and electric setup, and helps you choose a model that fits your budget and goals. On install day we set the heater
on a solid base, re-plumb the pad with unions and bypass where appropriate, and work with your licensed gas and/or electrician
to finish connections. Once everything is live, we bleed air, fire the heater, verify flow and temperature rise, and show you
exactly how to use and protect your new heater through the season.
What’s Included
- On-site review of pool size, pad layout, wind exposure, and cover use.
- Discussion of gas heater vs. heat pump options and which makes sense for your property.
- Heater sizing recommendations based on pool volume, target temperature, and season length.
- Removal of old heater (if applicable) and preparation of a stable pad or base for the new unit.
- Clean, service-friendly plumbing with unions, shutoffs, and bypass where appropriate.
- Integration with your existing pump, filter, and, where applicable, automation or salt system.
- Startup and testing: purge air, verify proper flow, and confirm heater is firing and holding temp.
- Owner walk-through at the pad — modes, setpoints, basic troubleshooting, and protection tips.
- Labeling of key valves and controls so you’re not guessing after we leave.
-
Note: Gas line and electrical work are handled by a licensed professional. We can coordinate with your
contractor or recommend options. Pool heater installation is custom — call for pricing.
Why Choose Empire Pools
- Local experience sizing heaters for windy backyards, shaded yards, and North Shore shoulder seasons.
- We look at the whole system — pump, filter, plumbing, gas, and electric — not just the heater box.
- Honest guidance on gas heater vs. heat pump so you understand pros, cons, and operating costs.
- Clean, organized equipment pads that future techs can actually work on without cutting everything apart.
- Integration with automation and salt systems to keep the heater protected and easy to control.
- Clear expectations on warm-up times so you know what your heater can realistically do.
- Goal: reliable heat with fewer surprises, so you’re using the pool instead of fighting cold water.
Call for pricing
What Heater Customers Say
★★★★★
“They sized the heater correctly, cleaned up the plumbing, and walked us through every setting. Night-and-day difference.” — M. Gallagher,
★★★★★
“We were debating gas vs. heat pump — Empire explained the real pros/cons and helped us choose what made sense for our yard.” — A. DeLuca,
★★★★★
“Super clean install with unions and shutoffs. The pad finally looks organized and it’s easy to service.” — J. Patel,
★★★★★
“We wanted to stretch the season into October. New heater + cover tips made it actually affordable to run.” — S. Brennan,
★★★★★
“They coordinated with our electrician, handled the pool-side plumbing, and everything fired up perfectly on day one.” — L. Kim,
Pool Heater Installation — FAQs
How do I know if my current heater is undersized?
If the heater runs constantly but the water barely climbs, or it takes “all day” to gain a few degrees, it’s often a sizing
or heat-loss issue. We check pool volume, plumbing flow, filter condition, wind exposure, and whether a cover is used.
Sometimes the heater is too small — other times the system is losing heat faster than it can add it.
Will a heat pump work well in ?
Heat pumps can be a great fit when you want steady, efficient heat during the warmer months. They work best when air temps
are consistently moderate. For earlier spring and late fall heating, a gas heater (or a larger heat pump with a cover plan)
may be the better match. We’ll recommend based on your season goals, not generic specs.
Can you install a heater if I don’t currently have gas at the equipment pad?
Yes, but it becomes a coordination job. A licensed plumber will need to run the gas line and size it properly for the BTU
load. If gas isn’t practical, we’ll discuss a heat pump option and verify electrical capacity. Either way, we plan the pad
layout so the final setup is clean and service-friendly.
Do I need a bypass or unions in the plumbing?
In most installs, yes. Unions make future service or replacement much easier, and a bypass can help with flow management and
servicing. We install plumbing in a way that keeps the pad organized and avoids the “cut everything out” problem later.
What can I do to keep heater operating costs down?
The biggest win is using a solar cover or safety cover when you’re not swimming — it reduces heat loss dramatically.
We also set realistic setpoints, explain run-time habits, and confirm your system flow is correct so the heater isn’t working
harder than it needs to.
