POOL EQUIPMENT UPGRADES • ,
Pool Equipment Upgrades in ,
Empire Pools upgrades outdated pool equipment in — from pumps, filters, and heaters
to salt systems, automation, and LED lighting. We design upgrades around your pool, your power bill, and how you
actually use the backyard in , so everything works together and stays easy to operate.
In , we commonly see equipment pads that are aging out after years of hard seasonal use — noisy single-speed pumps,
undersized or restrictive filters, and older heaters that struggle to keep up when you want consistent water temps. During your consult we
look at the full system (plumbing layout, return sizes, suction lines, valves, electrical feed, and gas line routing if you heat the pool)
so we can recommend upgrades that make sense as a complete package — not just “swap a part and hope.”
Because many homes in sit close to key corridors like Montauk Highway, Great River Road,
Connetquot Avenue, and the Connetquot River State Park Preserve corridor, we can often schedule installs efficiently and keep your project moving.
Neighborhoods near Montauk Highway, Great River Road, Connetquot Avenue, Bayard Cutting Arboretum State Park,
and nearby residential roads often have side-yard pads and tighter equipment corners, so we plan for clean, service-friendly layouts with unions,
labeling, and valve access that makes future service fast and straightforward.
The goal is simple: a quieter, cleaner-running pool that’s easier to manage — with properly sized equipment, smarter controls, and a setup you can
understand at a glance. We’ll walk you through how to run your new system before we leave, and we’ll set your schedules/speeds so you’re not guessing
on day one.
What to Expect
Smarter, Quieter, More Efficient Pool Equipment
Old equipment wastes energy, runs loud, and makes your pool harder to own — and in , we see that pain show up fast
with heavy summer use and debris load from mature trees in established neighborhoods near the park corridor. On each upgrade consult we
evaluate your entire pad — pump, filter, heater, plumbing, and controls — then recommend the right path based on how you
actually run the pool (daily run time, heating habits, and bather load). We size upgrades correctly for your pool and plumbing
so you’re not stuck with an oversized pump, a restrictive filter, or a heater that short-cycles.
pads are often tucked along side yards and tight equipment corners, so we rework the layout for a clean, service-friendly
footprint with unions, valves, and labeling that make everything easy to understand. Many of our routes run close to
Montauk Highway, Great River Road, Connetquot Avenue, and the Connetquot River State Park Preserve corridor, so we can schedule upgrades
efficiently and keep your timeline tight.
Options commonly discussed include variable-speed pumps, larger cartridge or DE filters, modern gas heaters or heat pumps, salt
chlorine generators, automation controls, and LED lighting. We don’t just swap equipment — we build a system that works together,
test it, program run times, and show you exactly how to run your new setup before we leave.
What’s Included
- On-site review of your current pump, filter, heater, plumbing, and controls.
- Discussion of goals: lower electric bills, easier maintenance, better heat, or salt conversion.
- Recommendations for variable-speed pumps sized for your pool and filter.
- Options for upgraded filters (cartridge, DE, or sand) for better clarity and easier cleaning.
- Heater or heat pump upgrade paths for faster warm-up and improved efficiency.
- Salt system, UV, or automation controller recommendations where they make sense.
- Pad re-plumbing and layout cleanup so valves, unions, and equipment are easy to access.
- Programming of new equipment (timers, speeds, temperature, schedules) before we leave.
- Labeled valves and basic “how to run your new system” walk-through at the pad.
-
Note: Every upgrade package is custom. Pool Equipment Upgrades start at $699 + tax
and pricing scales based on the equipment you choose and how much re-plumbing is required.
Why Choose Empire Pools
- Experience upgrading equipment pads across — we know what holds up in local conditions.
- We design systems, not just swap single pieces — everything is sized to work together.
- Clear side-by-side options: repair existing vs. upgrade, with honest pros and cons.
- Experience with variable-speed pumps, salt systems, and automation for easier ownership.
- Clean, organized equipment pads — unions, labels, and neat plumbing runs.
- Upgrades planned around your yard: access, line layout, and how you entertain outside.
- Goal: a quieter, more efficient, easier-to-manage pool for the next decade, not just one season.
Starting at $699 + tax
What Upgrade Customers Say
★★★★★
“We’re just off Montauk Highway and our old pump sounded like a jet. The variable-speed upgrade is whisper-quiet and our electric bill finally makes sense.” — P. Rinaldi, Great River
★★★★★
“They replaced our filter, cleaned up the plumbing, and added unions everywhere it mattered. Everything is labeled and it’s way easier to maintain now.” — K. Donnelly, Great River
★★★★★
“Near Great River Road — we wanted automation and scheduling. They set speeds, explained flow targets, and walked us through the controls step-by-step.” — M. Caruso, Great River
★★★★★
“Heater upgrade was neat and properly tested. They checked flow and made sure everything stayed balanced after the install.” — J. Feldman, Great River
★★★★★
“Salt system install was smooth. They explained targets, runtime, and what to watch after storms — no guessing.” — A. Sorrentino, Great River
Pool Equipment Upgrades — FAQs
What’s the best “first upgrade” for most pools in Great River?
For most Great River pools, a variable-speed pump is the best first upgrade. It cuts power costs, runs far quieter, and lets us dial in flow so filtration and heating work better together.
Can you upgrade my pump and keep my existing filter for now?
Sometimes. If the filter is properly sized and in good shape, we can upgrade the pump first and tune the flow. If the filter is restrictive or undersized, pairing upgrades usually delivers better clarity and prevents wasted energy.
How do I know if my heater is worth upgrading?
If your heater struggles to maintain temperature, cycles on/off frequently, leaks, or has costly ignition/heat-exchanger issues, replacement is usually the smarter long-term play. We’ll check flow, sizing, and install conditions before recommending a path.
Do you install automation and smart controls in Great River?
Yes. We install automation packages and set schedules/speeds so you can control pumps, heaters, and (if applicable) salt systems with less manual work. We’ll show you how to run it before we leave.
What helps you quote an equipment upgrade faster?
Clear photos of the pad (pump, filter, heater, plumbing) plus any readable model labels. If you tell us your goal (lower bills, cleaner water, better heat, salt/automation), we can build upgrade options quickly.
