POOL EQUIPMENT UPGRADES • ,
Pool Equipment Upgrades in ,
Empire Pools upgrades outdated pool equipment in — from pumps, filters, and heaters
to salt systems, automation, and LED lighting. We design upgrades around your pool, your power bill, and how you
actually use the backyard in , so everything works together and stays easy to operate.
In , we commonly see equipment pads that are aging out after years of hard seasonal use — noisy single-speed pumps,
undersized or restrictive filters, and older heaters that struggle to keep up when you want consistent water temps. During your consult we
look at the full system (plumbing layout, return sizes, suction lines, valves, electrical feed, and gas line routing if you heat the pool)
so we can recommend upgrades that make sense as a complete package — not just “swap a part and hope.”
Because many homes in sit close to major corridors like Jericho Turnpike (NY-25A), New York Ave (NY-110),
and Northern State Pkwy, we can often schedule installs efficiently and keep your project moving. Neighborhoods around
Main Street, West Neck Road, Oakwood Road, East Shore Road, and nearby side streets frequently have side-yard pads and tighter equipment corners,
so we plan for clean, service-friendly layouts with unions, labeling, and valve access that makes future service fast and straightforward.
The goal is simple: a quieter, cleaner-running pool that’s easier to manage — with properly sized equipment, smarter controls, and a setup you can
understand at a glance. We’ll walk you through how to run your new system before we leave, and we’ll set your schedules/speeds so you’re not guessing
on day one.
What to Expect
Smarter, Quieter, More Efficient Pool Equipment
Old equipment wastes energy, runs loud, and makes your pool harder to own — and in , we see that pain show up fast
with heavy summer use and debris load from mature trees in established neighborhoods. On each upgrade consult we
evaluate your entire pad — pump, filter, heater, plumbing, and controls — then recommend the right path based on how you
actually run the pool (daily run time, heating habits, and bather load). We size upgrades correctly for your pool and plumbing
so you’re not stuck with an oversized pump, a restrictive filter, or a heater that short-cycles.
pads are often tucked along side yards and tight equipment corners, so we rework the layout for a clean, service-friendly
footprint with unions, valves, and labeling that make everything easy to understand. Many of our routes run right off
the main corridors like NY-110 and nearby access via Northern State Pkwy, so we can schedule upgrades
efficiently and keep your timeline tight.
Options commonly discussed include variable-speed pumps, larger cartridge or DE filters, modern gas heaters or heat pumps, salt
chlorine generators, automation controls, and LED lighting. We don’t just swap equipment — we build a system that works together,
test it, program run times, and show you exactly how to run your new setup before we leave.
What’s Included
- On-site review of your current pump, filter, heater, plumbing, and controls.
- Discussion of goals: lower electric bills, easier maintenance, better heat, or salt conversion.
- Recommendations for variable-speed pumps sized for your pool and filter.
- Options for upgraded filters (cartridge, DE, or sand) for better clarity and easier cleaning.
- Heater or heat pump upgrade paths for faster warm-up and improved efficiency.
- Salt system, UV, or automation controller recommendations where they make sense.
- Pad re-plumbing and layout cleanup so valves, unions, and equipment are easy to access.
- Programming of new equipment (timers, speeds, temperature, schedules) before we leave.
- Labeled valves and basic “how to run your new system” walk-through at the pad.
-
Note: Every upgrade package is custom. Pool Equipment Upgrades start at $699 + tax
and pricing scales based on the equipment you choose and how much re-plumbing is required.
Why Choose Empire Pools
- Decades of experience upgrading equipment pads — we know what holds up in local conditions.
- We design systems, not just swap single pieces — everything is sized to work together.
- Clear side-by-side options: repair existing vs. upgrade, with honest pros and cons.
- Experience with variable-speed pumps, salt systems, and automation for easier ownership.
- Clean, organized equipment pads — unions, labels, and neat plumbing runs.
- Upgrades planned around your yard: access, line layout, and how you entertain outside.
- Goal: a quieter, more efficient, easier-to-manage pool for the next decade, not just one season.
Starting at $699 + tax
What Upgrade Customers Say
★★★★★
“We’re in and they swapped our old pump for a variable-speed and re-did the pad neatly. Super quiet now.” — S. Donnelly,
★★★★★
“Filter upgrade made a huge difference. They sized it right and explained exactly how to clean it. Water has been spotless.” — M. Rizzo,
★★★★★
“Automation install was painless. They set schedules, walked us through the app, and labeled everything so it’s idiot-proof.” — K. Hanley,
★★★★★
“Heater replacement was clean and professional. They tested it, tuned it, and the whole equipment pad looks organized again.” — J. Petrella,
★★★★★
“We went salt + new pump and it’s been the best upgrade we’ve done. They explained salt targets, runtime, and what to watch for.” — A. Costello,
Pool Equipment Upgrades — FAQs
What’s the smartest first upgrade for most pools in ?
For most pools, it’s a correctly sized variable-speed pump. It runs quieter, gives you better control over circulation,
and can reduce wasted energy compared to older single-speed pumps. We size it based on your pool and plumbing so it performs properly.
Do I need to replace my filter if I upgrade the pump?
Not always. If your filter is in good shape and properly sized, we can keep it. But if it’s undersized, restrictive,
or near end-of-life, pairing a pump upgrade with a larger filter often improves clarity and lowers system strain.
Can you clean up my equipment pad layout during an upgrade?
Yes. Many pads benefit from better access and organization. We can rework sections of plumbing,
add unions where needed, and label valves so future service is faster and your system is easier to understand.
Is a salt system worth it in ?
If you want a more consistent chlorine level and easier daily ownership, salt can be a great fit. We’ll confirm your pool volume,
equipment compatibility, and where the cell should be placed so it’s serviceable and properly sized.
Will you program schedules/speeds and show me how to use everything?
Yes. We test the system, set run schedules and pump speeds, verify heater/automation settings if included,
and walk you through what each control does so you’re not guessing after we leave.
Can you bundle upgrades (pump + filter + heater + automation) into one package?
Absolutely. Bundling upgrades often delivers the best performance because everything is sized to work together.
We’ll lay out clear “good / better / best” options so you can choose what matches your goals and budget.
