Professional •
in
Replacing an aging above-ground liner in ? Empire Pools installs beaded, J-hook, and overlap liners the right way — with prep that’s built for local conditions.
In you’re dealing with a mix of humid summer air, strong sun exposure that can soften and stretch vinyl, and spring/fall temperature swings that make wrinkles more likely if the liner isn’t seated correctly.
We drain and remove the old liner, inspect the wall and coping track, treat surface rust, and re-shape the base/cove so the floor is smooth before the new liner goes in.
Then we hang and center the liner, vacuum-set it to pull out trapped air and reduce wrinkles, and we take our time aligning the pattern and waterline before the pool fills.
Jericho installs often involve access through tight side yards and mature landscaping — whether you’re near Jericho Turnpike, Old Country Road, Cedar Swamp Road, Round Swamp Road, Brush Hollow Road, South Woods Road, or neighborhood blocks closer to parks and school areas.
We plan the setup to keep your yard clean, protect pavers and patios, and keep hoses/pumps organized so the job stays efficient and safe.
If your pool is in windier pockets near open lots or along higher-exposure streets, we time the vacuum-set and the start of the fill to help the liner lock in tight and straight.
Expect fast scheduling, clear communication, and a clean jobsite when we leave — with photos of key steps so you know exactly what was done.
What’s Included
- Drain, remove, and dispose of the old liner (pump-out included).
- Wall inspection, rust treatment, and coping/track clean-up.
- Base prep: re-shape sand cove, smooth floor, and remove debris.
- Professional hang of beaded, J-hook, or overlap liners.
- Vacuum-set to pull air and minimize wrinkles before fill.
- Reinstall skimmer/return faceplates with new gaskets.
- Pattern alignment and even waterline check.
- Photos of key steps for your records.
- Note: Water delivery and wall panel repairs are available as add-ons priced on site.
- Note: Client provides liner unless requested — we can supply on request.
Why Choose Empire Pools
- Nassau & Suffolk expertise — installs tuned for local sun, shade, and wind.
- Vacuum-set technique for tight fit and clean pattern lines.
- Fast scheduling across LI with text updates.
- Skimmer/return kits and gaskets stocked on the truck.
- Clear quotes & scope before work begins — no surprises.
- Two-day and same-day text reminders so access is easy.
- Every job gets a follow-up text — your satisfaction is guaranteed.
Call for pricing
Customer Reviews
★★★★★
“Our above-ground pool in Jericho needed a full liner swap. Empire prepped the base, vacuum-set the liner, and the floor came out perfectly smooth.” — K. Nolan, Jericho
★★★★★
“Near Jericho Turnpike they treated wall rust, reshaped the cove, and hung a beaded liner with clean pattern alignment. Zero wrinkles.” — D. Caruso, Jericho
★★★★★
“Our Jericho overlap liner finally failed and they handled everything — pump-out, install, new gaskets, and a leak-free finish.” — S. Patel, Jericho
★★★★★
“They stayed until the liner was vacuum-set tight and every wrinkle was worked out before the fill. You can tell they know what they’re doing.” — A. Marino, Jericho
★★★★★
“Empire made our Jericho pool look brand new. Straight waterline, fittings sealed perfectly, and the yard was spotless after.” — J. Feldman, Jericho
FREQUENTLY ASKED QUESTIONS
A/G Liner Replacement FAQs
Straight answers for Jericho homeowners scheduling an above-ground liner replacement.
What’s the most common reason A/G liners fail in Jericho?
Most failures are age + UV exposure drying the vinyl, plus gradual shrinking at the bead/track. Once the liner gets brittle, pinholes turn into tears quickly.
Can you replace the liner if the pool wall has rust?
Yes. Light-to-moderate surface rust can be treated during prep. If we find deeper corrosion or a weak panel, we’ll show you what we see and quote the repair before installing the new liner.
Do you install beaded, J-hook, and overlap liners?
All three. We’ll confirm your coping/track setup so you order the correct liner and the fit locks in securely.
How long does an A/G liner replacement take?
Most installs are 3–6 hours depending on pool size, access, and base prep. Fill time depends on hose flow or water delivery timing.
What is vacuum-setting and does it really reduce wrinkles?
Yes. Vacuum-setting pulls air out from behind the liner so it seats tight against the wall/floor before the water weight locks it in — that’s how you get a cleaner, tighter finish.
Do you replace gaskets on the skimmer and return?
Yes — reinstalling fittings with fresh gaskets is the best way to prevent slow leaks after the liner is installed.
What do you need from me before you arrive?
Clear access to the pool, a working outdoor spigot for refill (or confirm water delivery), and photos/measurements so we verify liner type and size.
How do you price an A/G liner replacement in Jericho?
Pricing depends on pool diameter/height, liner style, access, and the amount of prep needed. Call for pricing — we can usually quote quickly with photos and measurements.
Can you replace the liner if my top rails have to come off?
Yes. Many A/G installs require removing rails/caps to hang the liner correctly. We keep hardware organized and reassemble cleanly so everything seats back tight.
What time of year is best for an A/G liner replacement on Long Island?
Warm, stable days are best because vinyl is more flexible and seats smoother. We can still do replacements in cooler weather, but we take extra time to prevent wrinkles.
