LINER REPLACEMENT •

Pool Liner Replacement in

Empire Pools installs premium vinyl liners for pools — precision measuring, sub-base touch-ups, bead-track inspection, and wrinkle-free vac set. We plan each replacement around debris and wind patterns along Hempstead Turnpike, Wantagh Avenue, Jerusalem Avenue, and the neighborhood corridors near Eisenhower Park to keep debris out during set and fill. Our techs document measurements, track condition, and cut-ins so your new liner fits tight and opens crystal clear.

Every liner job starts with detail work that most companies rush: we verify wall height, radiuses, hopper/deep-end geometry, and step/bench dimensions so the factory build matches your pool—not a “close enough” template. Before the liner goes in, we inspect the bead receiver, coping, and track for brittleness or gaps that can cause the liner to pop out later, and we flag anything that should be corrected while the pool is empty. On install day we prep the floor so it’s smooth underfoot (patching divots and low spots, addressing vermiculite or base wear where needed), then we use a controlled vac set and staged fill pace to pull the liner evenly into corners and seams. If conditions change—wind picks up, leaves start dropping, or access is tight—we adjust our staging (hose routes, equipment placement, debris control) so the liner stays clean during the most important part of the job: the first few inches of water and final alignment before cut-ins.

• Local Insight

Tuned for tighter access & neighborhood debris patterns

Levittown properties often have compact side-yard access and mature landscaping that can kick up debris during vac-set. We stage equipment, route hoses cleanly, and manage fill pace so the liner sets smooth.

From homes off Wantagh Avenue and Jerusalem Avenue to pockets near Hempstead Turnpike and Eisenhower Park, we plan delivery, access, and hose routes to protect landscaping and speed the install.

What’s Included

  • On-site measure (length/width/depths), wall height, and corner radii verification.
  • Bead track inspection; replace brittle lock-in as needed (quoted on site).
  • Sub-base touch-ups: floor trowel/patch, divot and wrinkle prevention.
  • Liner hang and dual vac set for tight fit prior to filling.
  • Cut-ins after water passes threshold: main drains, returns, lights, and skimmer.
  • Hardware refresh (gaskets/faceplates/screws) as required by condition.
  • Haul-away of old liner (available; quoted by weight/condition).
  • Fill guidance to protect seams and prevent liner float; chemistry start-up.
  • Note: Structural repairs, wall foam, vermiculite/base rebuild, and plumbing repairs are quoted if observed.

Why Choose Empire Pools

  • expertise — manage access, staging, and fast weather swings during vac set.
  • Wrinkle-free process with staged fill, seam alignment, and photo documentation.
  • Transparent options: pattern choices, wall foam, step gaskets, and hardware refresh.
  • Coordination for water delivery or hydrant permits when required (town rules vary).
  • Clear scope & pricing before we begin — no surprises.
  • Post-install check-in to confirm fit, fill progress, and chemistry balance.
Starting at $2,800 + tax

Local Reviews

★★★★★

“We’re right near Wantagh Avenue and the liner came out perfectly smooth. No wrinkles, and the corners are tight.” — M. R.,

★★★★★

“They explained the whole process and even corrected a couple low spots before the liner went in. Huge difference.” — D. S.,

★★★★★

“Clean work and great communication. Cut-ins were neat and they guided the fill so nothing shifted.” — K. T.,

★★★★★

“They caught a bead track issue early and handled it before install. Exactly the kind of detail you want.” — J. P.,

★★★★★

“From measurement to install day, everything was organized. The liner fit feels custom.” — A. L.,

See 105+ five-star reviews →

Liner Replacement — FAQs

Do you replace pool liners throughout , NY?
Yes — we cover and surrounding Nassau/Suffolk areas. We start with an on-site measurement, then coordinate the liner build and install window.
How do I know if my liner needs replacement or just a patch?
If you’re seeing repeated tearing, brittleness, seam separation, or the liner is shrinking/pulling off the track, replacement is usually the right move. If it’s isolated damage, we can advise on repair vs. replace after photos or an inspection.
How long does a liner replacement take once you start?
Most installs are completed in a day once the liner is on site. Fill time varies based on water source and flow rate; we’ll guide the fill pace to protect seams and prevent liner float.
Can you handle bead-track, coping, or gasket issues while the pool is empty?
Yes. We inspect the track/receiver during measurement and again on install day. If anything is cracked, loose, or brittle, we quote the fix before proceeding so the liner stays locked in long-term.
What if my pool has steps, benches, or a custom deep end?
No problem — we measure steps/benches and hopper geometry carefully so the factory build matches your pool precisely (not a generic “template” liner).
What can delay a liner install in ?
Common delays include water logistics, unexpected base repairs once the old liner is out, and weather/wind on install day. We plan staging and scheduling to minimize risk and reschedules.
What should I send to get a faster estimate?
Pool shape, approximate dimensions, wall height, step/bench details, and a few photos (wide pool shot + equipment pad + bead track close-up) helps us price accurately and advise on next steps.
Explore Liner Options 📞 Call for Liner Replacement Help