Professional •
in
Replacing an aging above-ground liner in ? Empire Pools installs beaded, J-hook, and overlap liners the right way — with prep that’s built for local conditions.
In you’re dealing with humid summer air, strong sun exposure that can soften and stretch vinyl, and spring/fall temperature swings that make wrinkles more likely if the liner isn’t seated correctly.
We drain and remove the old liner, inspect the wall and coping track, treat surface rust, and re-shape the base/cove so the floor is smooth before the new liner goes in.
Then we hang and center the liner, vacuum-set it to pull out trapped air and reduce wrinkles, and we take our time aligning the pattern and waterline before the pool fills.
installs often involve access through tight side yards and mature landscaping — whether you’re near Jericho Turnpike (NY-25), Walt Whitman Road (NY-110), Old Walt Whitman Road, Broadhollow Road, Ruland Road, Round Swamp Road, Half Hollow Road, Sweet Hollow Road, or along the Long Island Expressway (I-495) corridor.
We plan the setup to keep your yard clean, protect pavers and patios, and keep hoses/pumps organized so the job stays efficient and safe.
If your pool is in windier pockets near open areas, we time the vacuum-set and the start of the fill to help the liner lock in tight and straight.
Expect fast scheduling, clear communication, and a clean jobsite when we leave — with photos of key steps so you know exactly what was done.
What’s Included
- Drain, remove, and dispose of the old liner (pump-out included).
- Wall inspection, rust treatment, and coping/track clean-up.
- Base prep: re-shape sand cove, smooth floor, and remove debris.
- Professional hang of beaded, J-hook, or overlap liners.
- Vacuum-set to pull air and minimize wrinkles before fill.
- Reinstall skimmer/return faceplates with new gaskets.
- Pattern alignment and even waterline check.
- Photos of key steps for your records.
- Note: Water delivery and wall panel repairs are available as add-ons priced on site.
- Note: Client provides liner unless requested — we can supply on request.
Why Choose Empire Pools
- Suffolk & Nassau expertise — installs tuned for local sun, shade, and wind.
- Vacuum-set technique for tight fit and clean pattern lines.
- Fast scheduling across LI with text updates.
- Skimmer/return kits and gaskets stocked on the truck.
- Clear quotes & scope before work begins — no surprises.
- Two-day and same-day text reminders so access is easy.
- Every job gets a follow-up text — your satisfaction is guaranteed.
Call for pricing
Customer Reviews
★★★★★
“We’re in Melville and our liner finally split at the seam. Their base prep was excellent and the vacuum-set kept everything smooth — the fit looks perfect.” — T. Carbone, Melville
★★★★★
“Tight access off Ruland Road and they still kept it clean and organized. Pattern lines are straight and the waterline came out even.” — M. Donnelly, Melville
★★★★★
“They treated rust spots on the wall before hanging the liner and replaced gaskets so nothing seeped during the fill. You can tell they don’t cut corners.” — J. Ferraro, Melville
★★★★★
“We’re near Walt Whitman Road (NY-110) and get full sun. They didn’t rush the set — the liner locked in tight and looks brand new.” — A. Sorrentino, Melville
★★★★★
“Clear communication and photo updates the whole way. They protected our pavers and left everything spotless. Exactly what you want for a liner job.” — R. Halpern, Melville
FREQUENTLY ASKED QUESTIONS
A/G Liner Replacement FAQs
Straight answers for Melville homeowners scheduling an above-ground liner replacement.
How do I confirm the correct liner size for my Melville pool?
Measure the pool diameter (or length/width if oval) and confirm the wall height (most are 48", 52", or 54"). If you send photos of your top rail and skimmer area, we’ll verify sizing so you don’t order wrong.
What’s the fastest way to tell if I have a beaded track vs J-hook?
A beaded liner locks into a receiver/track under the coping. A J-hook hangs over the wall like a “J” and sits under the top rails. A quick close-up photo at the coping is usually all we need to identify it.
Do you always vacuum-set the liner, or only sometimes?
We vacuum-set whenever conditions allow. It’s the best way to pull out trapped air and seat the vinyl tight to the wall/floor, which helps prevent wrinkles as the water rises and the liner warms up in the sun.
Can a new liner fix small leaks around the skimmer/return?
Often, yes — especially if the old liner shrank or the gaskets were worn. We reinstall faceplates and replace gaskets as needed to reduce seepage and help the seal stay tight during the first heat cycle.
What’s the biggest reason liner jobs fail early?
Skipping base correction. If the sand floor has low spots, rocks, or a damaged cove, the liner can stretch unevenly and stress seams. Solid prep is what protects the liner long-term.
How long does the install take, and what slows it down?
Most installs run about 3–6 hours. The biggest variables are access (tight yards), how much base smoothing is needed, and whether we’re coordinating a water delivery vs. using a hose fill.
Should I drain the pool ahead of time?
No — we handle pump-out as part of the job so the removal timing matches install timing. Draining too early can let the base dry out, shift, or get debris in it before the new liner is hung.
Do you haul away the old liner and debris?
Yes — old liner removal and disposal are included. We keep the work area organized and protect nearby surfaces, especially if you have pavers, patios, or landscaped edges.
How is pricing determined for an A/G liner replacement in Melville?
Price depends on pool size, wall height, liner style (beaded/J-hook/overlap), access, and base condition. If you text photos and measurements, we can usually quote quickly. Call for pricing.
Can you supply the liner if I don’t want to order it?
Yes — we can supply on request. We’ll confirm diameter + wall height first, then recommend options that fit your pool and your budget. If you’re ordering yourself, we’ll verify it’s correct before install day.
