POOL HEATER INSTALLATION •
Pool Heater Installation in
Empire Pools installs and replaces gas pool heaters and heat pumps for homeowners who want a longer, more reliable
swim season. We don’t just “swap the box” — we help you choose the right heater based on pool size, target temperature,
cover usage, and real-world backyard conditions (wind exposure, shade patterns, and colder nights can change what “enough heat”
actually means). We also look at your equipment pad and plumbing so the finished install is clean, service-friendly,
and easy to operate — with unions, shutoffs, and a layout that makes sense.
Because installs often vary by property, we walk you through the practical details up front: gas vs. heat pump,
warm-up expectations, operating cost considerations, and what needs to be coordinated with a licensed gas and/or electrical pro.
Whether your pad is behind the house near Union Blvd, off Udall Road, close to Sunrise Highway (NY-27),
along Montauk Highway (NY-27A), or nearer the Robert Moses Causeway approach, we plan the job around access, airflow clearances,
and a neat final setup. The goal is simple: start your season earlier, stay warm later, and never have to guess which buttons to push.
What to Expect
Stay Warmer, Longer in
A properly-sized pool heater is more than just BTUs on a box. We look at your pool size, depth, wind exposure, cover usage,
and how you actually swim before recommending a heater. Our team explains gas heaters vs. heat pumps, reviews your
existing gas and electric setup, and helps you choose a model that fits your budget and goals. On install day we set the heater
on a solid base, re-plumb the pad with unions and bypass where appropriate, and work with your licensed gas and/or electrician
to finish connections. Once everything is live, we bleed air, fire the heater, verify flow and temperature rise, and show you
exactly how to use and protect your new heater through the season.
What’s Included
- On-site review of pool size, pad layout, wind exposure, and cover use.
- Discussion of gas heater vs. heat pump options and which makes sense for your property.
- Heater sizing recommendations based on pool volume, target temperature, and season length.
- Removal of old heater (if applicable) and preparation of a stable pad or base for the new unit.
- Clean, service-friendly plumbing with unions, shutoffs, and bypass where appropriate.
- Integration with your existing pump, filter, and, where applicable, automation or salt system.
- Startup and testing: purge air, verify proper flow, and confirm heater is firing and holding temp.
- Owner walk-through at the pad — modes, setpoints, basic troubleshooting, and protection tips.
- Labeling of key valves and controls so you’re not guessing after we leave.
-
Note: Gas line and electrical work are handled by a licensed professional. We can coordinate with your
contractor or recommend options. Pool heater installation is custom — call for pricing.
Why Choose Empire Pools
- Local experience sizing heaters for windy backyards, shaded yards, and shoulder seasons.
- We look at the whole system — pump, filter, plumbing, gas, and electric — not just the heater box.
- Honest guidance on gas heater vs. heat pump so you understand pros, cons, and operating costs.
- Clean, organized equipment pads that future techs can actually work on without cutting everything apart.
- Integration with automation and salt systems to keep the heater protected and easy to control.
- Clear expectations on warm-up times so you know what your heater can realistically do.
- Goal: reliable heat with fewer surprises, so you’re using the pool instead of fighting cold water.
Call for pricing
What Heater Customers Say
★★★★★
“Our heater was undersized and took forever to warm up. Empire re-sized it correctly and the pad plumbing looks 10x cleaner.” — J. Bennett, West Islip
★★★★★
“They explained gas vs. heat pump in plain English and didn’t push the most expensive option. The setup runs quiet and holds temp.” — M. Alvarez, West Islip
★★★★★
“Install day was smooth—everything was labeled, valves made sense, and they walked us through operation and basic troubleshooting.” — S. Patel, West Islip
★★★★★
“We’re near the bay and wind used to strip heat fast. Between the heater sizing and cover tips, we extended the season a lot.” — K. Donnelly, West Islip
★★★★★
“They coordinated cleanly with our gas contractor so nothing felt ‘piecemeal.’ Final result is tidy and service-friendly.” — A. Romano, West Islip
Pool Heater Installation — FAQs
How do you figure out the right heater size for my pool?
We size heaters using your pool volume plus real-world factors that change performance: wind exposure, shade, cover use,
desired swim months, and target temperature. Then we match you to a BTU (gas) or capacity range (heat pump) that balances
warm-up speed with operating cost—so you get predictable results, not guesswork.
What’s the biggest difference between a gas heater and a heat pump?
Gas heaters heat faster and are great for quick warm-ups and spas. Heat pumps are typically more efficient but
heat more gradually and perform best when air temps are favorable. We’ll recommend the option that fits how you actually use
the pool in —and we’ll be upfront about what to expect on cooler spring/fall nights.
Will my existing pump and filter work with a new heater?
Usually, yes—but we confirm. Heaters require the right flow rate and a plumbing layout that won’t choke circulation.
We check your pump size, filter condition, and pad configuration, then build the install with unions, shutoffs, and (when appropriate) a bypass
so it’s easy to service and protects the heater long-term.
Do you handle the gas line and electrical work?
Gas and electrical connections are completed by a licensed professional. We can coordinate with your contractor (or suggest options),
and we handle the pool-side scope: pad layout, plumbing, heater placement, start-up sequence, testing, and owner walk-through so everything
is clean and cohesive.
How can I keep heater costs down once it’s installed?
The biggest cost-saver is using a cover—it cuts heat loss dramatically. After that: keep chemistry balanced, maintain strong flow,
keep the pad area clear for airflow, and avoid “yo-yo” temperature swings. We’ll show you practical setpoints and habits so you get comfort
without burning money.
